![]() The output of netstat may include an IP range/Destination for your remote network (e.g., 192.168/16), and may show the interface that should be used (Netif) on the right. If the route for that device is not showing the correct interface, it may help to show all routes on the machine using netstat: netstat -nr Often, you'll see something like "ppp0" or "gif0" (or some other interface, other than en0/en1) The route should report an interface that is being used to connect to that device. If the machine is responding to pings, you should be able to connect to it.However, if you're not seeing IMCP (ping) responses, it's possible that your machine doesn't know the route to that computer (i.e., the VPN interface.) See what 'route' reports for that IP: route get 192.168.1.5 If you are still not able to connect to the server using the IP address, see if your machine can ping that IP address (assuming prismweb5's IP is 192.168.1.5): ping 192.168.1.5 ![]() However, this would require that you know what the IP address of the server "prismweb5" is (or be able to perform a lookup to retrieve that address). I'm not sure about Shrewsoft, but many VPN clients allow DNS server settings to be changed to specific servers when the VPN connects.Īlternately, you can avoid using DNS names to connect to the server, and simply use the IP address to connect. This will allow your machine to perform lookups of 'internal' names. This setup may be referred to as "split-DNS", and the private name "prismweb5" may not be something that can be looked up on your 'normal' DNS servers (those provided by your home ISP).Ī workaround for this would potentially be to set the DNS server that is at the remote office as the primary DNS server for the network interface (Ethernet, Wi-Fi) that you're using to connect. I am using the Shrew Soft VPN client v2.2.2 to connect to a remote network. It's also possible that the DNS name "prismweb5" cannot be resolved from outside of the network. I can RDP into a file sharing PC with no issues and perform updates, use the browser to download files, uninstall software from the Control Panel, etc. The VPN tunnel will come up as expected and the connection is established. More Kaspersky VPN 21.2.16. It can be used to communicatewith systems running ipsec-tools. ![]() ![]() The search domain would be appended to the hostname that you're referencing above, so if your search domain is "", the FQDN would be . The VPN client is Shrew Soft version 2.2.2 and 2.1.7 running on both Windows 7 and Windows 8.1 computers. Shrew Soft VPN client Philipp Hahn - Open Source - The Shrew Soft VPN Client for Unix is a free IPsecClient for FreeBSD, NetBSD, and Linux basedoperating systems. You're referencing the SSH server with the name "prismweb5" - that name will likely only work if you have "search domains" setup for the network interface that you're using. Secure your remote access communication with the Shrew Soft VPN Client HOME. ![]()
0 Comments
Leave a Reply. |